Enquire nowUEE50220 – Diploma of Electrical & Instrumentation
COST
$7,000 (for Full Qualification)
Course Duration
18 Days
locationS
Where can I study?
Perth, Karratha & Adelaide
OBJECTIVE
- To enhance students’ professional development skills in industrial networking connecting more than one PLC with HMI, with multiple loops in a live process plant
- To broaden knowledge in understanding how processing plant architectures are put together
- To write up plant control philosophy and project engineering specification
- To open more doors for you in areas of instrumentation and control technical authority and supervisory roles
Scope
This qualification provides competencies to develop, select, install, commission, maintain and diagnose faults/malfunctions on electrical, instrumentation and control equipment and systems, including problem solving in industrial networking with HMI plant interface.
Target Workforce
This post-trade professional development gap training encourages those who hold Certificate III in Instrumentation and Control and are interested in learning or up-skilling in writing engineering specifications and problem solving skills in industrial networking with PLC with HMI interface.
PRE-REQUISITES
This course is a post trade training, so a current un-restricted electrical license issued by any Australian state or territory is required. It is a PMV entry requirement that participants have completed UEE40420 Certificate IV in Electrical – Instrumentation.
Training Method
Blended delivery of 40% theory and 60% practical training with equipment that you are likely to see in a typical industrial environment in hazardous areas with HART rated instrumentation with PLC control system.
OUTCOME
Full qualification – UEE50220 Diploma of Electrical and Instrumentation
Students will be entitled to the full qualification who:
- Students who hold an unrestricted electrical licence issued by a state or Territory and and are successfully competent in both theoretical and practical training for all units of competency in the training package (refer http://training.gov.au/Training/Details/UEE50220).
Training Content
You will undergo one-on-one practical training with industry experienced, qualified Instrument and Electrical Professional Trainers in the following areas on the purpose-built instrumentation and control system skids/ facilities with HART compliant field instruments and Siemens and Allen Bradley PLC Control System:
- 1. Configure, maintain and diagnose faults/malfunctions in industrial control system network
- 2. Draw processing plant architectures and write up plant control philosophy
- 3. Write specification for projects – electrotechnology
- 4. Pressure (suppression/elevation of transmitter) (Covered in UEE40420 and UEE31220)
- 5. Level Radar / Ultrasonic configuration (Covered in UEE40420 and UEE31220)
- 6. Capacitance level configuration (Covered in UEE40420)
- 7. Flow – configuration and control (Covered in UEE40420)
- 8. Calibration of valves (Covered in UEE31220)
- 9. Temperature (RTD / Thermocouples) (Covered in UEE31220)
- 10. Program digital and analog PLC (Covered in UEE31220) and HMI (Covered in UEE31220). Download, test and fault find PLC program on PLC hardware and HMI (Covered in UEE40420 and UEE31220)
- 11. Configuration of smart devices via HART Modem and Hand-Held Configurator, (Covered in UEE40420 and UEE31220)
- 12. Reading P&ID and 2 and 4 Wire loop drawings. Verify the drawings against as installed equipment (Covered in UEE31220)
- 13. Calibration of the field instruments; installing instruments; fault finding; tuning loops from a control system (Covered in UEE31220)
- 14. Understanding how to test that Magnetic flow meter are operational (Covered in UEE40420 and UEE31220)
PMV offers a small size class with flexible training to accommodate difficult rosters / work schedules.
Eligible candidates across Western Australia will receive WA funding and get qualified in high-demand skilled occupations.
Revised course cost: $2084.00*
*For more information, please get in touch with the office to discuss.
Find out all about the current industry
practices and latest trends!
PV Solar Installation: Common Mistakes and Best Practices
In 2023, the Clean Energy Council (CEC), through inspections conducted by the Clean Energy Regulator, identified widespread non-compliant solar instal...
Writing Safe and Effective High Voltage Switching Programs: Key Considerations and Tip
High voltage (HV) switching is a high-risk activity requiring a disciplined, methodical approach. A critical tool for managing this risk is the swit...
Ten Common Mistakes People Make in Hazardous Areas
Hazardous area safety demands continuous vigilance, competency and respect for procedures. Small errors can have large consequences, but most incident...
Unlock Your Potential With Electrical Instrumentation at PMV
In an era where technology drives performance, electrical instrumentation has become a cornerstone of the process control industry. This specialisatio...
Navigating The Path To Hazardous Areas: A Guide For Electricians
Are you looking for a guide to navigating hazardous areas as an electrician? The journey of specializing in dangerous areas within the electrical indu...
Industrial Automation Trends Shaping The Future: Insights-for-electricians-students-and-institutions
Are you an electrician, student, or institution interested in staying ahead in the ever-evolving field of industrial automation? With the rapid advanc...
Matthew Garnaut
Stu
Josh Doble
Nathan Antonovich
Ryan Wehr
contact us
The right time is now!
The right time is now! Our training programs are beneficial to upskill and stand out in the industry
Learn more about our courses, dates, and enrolment options. Get in touch!