Enquire nowUEE31220 Certificate III in Instrumentation and Control
COST
$4,500
Course Duration
12 Days
locationS
Where can I study?
Perth, Karratha & Adelaide
OBJECTIVE
- To enhance the participants PLC, HMI and Process Instrumentation skills
- To log and sign off participant’s work experience in the instrumentation installation, calibration, testing, PLC programing and fault finding
- To give participant’s an edge to enter into the oil and gas or mineral processing industry which uses PLC interfaces with HART compliant field instrumentation.
Scope
This qualification provides competencies to select, install, set up, test, fault find, repair and maintain systems and devices for measurement and recording of physical/chemical phenomenon and related process control.
Target Workforce
All candidates interested in learning or up-skilling their PLC programming, HMI, and HART field Instrumentation skills in calibration, testing and fault finding are encouraged to undertake this post-trade professional development gap training course.
Holding UEE40411 Certificate IV in Electrical – Instrumentation is a PMV entry requirement
PRE-REQUISITES
A current unrestricted electrical license (any Australian state or territory) is preferred. It is a PMV entry requirement that participants have completed UEE40420 Certificate IV in Electrical – Instrumentation.
* Electrical workers and overseas instrumentation technicians and engineers who have extended hands-on experience in electrical, instrumentation and control field installations would:
- need to get their requisite experience signed off from the site supervisor(s),
- and may be eligible to receive full qualification on completion of the all units of competency specified in the training package http://training.gov.au/Training/Details/UEE31220.
Training Method
Blended delivery of 40% theory and 60% practical training with equipment that you are likely to see in a typical modern industrial environment with HART rated instrumentation and final control elements with PLC control system.
*We require completion of UEE40420 Certificate IV in Electrical Instrumentation. This will give you the exposure you require to apply for work in Instrumentation and then proceed onto UEE31220 Certificate III in Instrumentation and Control.
All participants must complete PMV’s Registration and Work Recognition (RWR) form. This form is to be signed off by a qualified instrumentation site supervisor(s) and must show participants have at least 1 years’ worth of hands-on experience in electrical, instrumentation and control field installations. Participants are responsible for gaining their own experience and may complete this experience before, in parallel to, or after Gap Training provided by PMV.
OUTCOME
A) Full qualification – UEE31220 Certificate III in Instrumentation and Control
The full qualification will be issued to the students who:
- Candidates who hold an ‘Unrestricted Electrical licence, issued by a state or territory and are successfully competent in both theoretical and practical training, and who have completed UEE40420 Certificate IV in Electrical Instrumentation and get their Requisite Work Experience form (signed off by their work supervisor, which will be verified by PMV), will receive the full qualification.
B) Statement of Attainment (SOA)
This Statement is issued to students who successfully complete one or more units of competency in the training package but do not meet the requirements for a full qualification. It is also issued to Electrical Engineers.
- (e.g. Electrical Engineers). In addition, they will need to get their Requisite Work Experience form (signed off by their work supervisor, which will be verified by PMV).
Training Content
You will undergo one on one practical training with industry experienced, qualified Instrument and Electrical Professional Trainers in the following areas on the purpose-built hazardous areas and instrumentation skids/ facilities with HART compliant field instruments and Siemens and Allen Bradley PLC Control System:
- Pressure (suppression/elevation of transmitter)
- Level Radar / Ultrasonic configuration
- Conductivity level configuration
- Flow – configuration and control including Magnetic flow meter operation
- Calibration of Temperature loops with RTD and Thermocouples
- Calibration of Control valves and operation and working with Variable Speed Drive (VSD)
- Program digital and analog Siemens and Allen Bradley PLC and HMI. Download, test and fault find PLC program on PLC hardware and HMI
- Configuration of smart devices via HART Modem and Hand-Held Configurator,
- Reading P&ID and 2 and 4 Wire loop drawings. Verify the drawings against as installed equipment
- Calibration of the field instruments; installing instruments; fault finding;
- Tuning of Proportional (P), Integral(I) and Derivative (D) loops
- Understanding and conducting Critical Function Testing (CFT)
- Understanding RLC circuits, calculating power factors and fault currents
PMV offers a small size class with flexible training to accommodate difficult rosters / work schedules.
Find out all about the current industry
practices and latest trends!
PV Solar Installation: Common Mistakes and Best Practices
In 2023, the Clean Energy Council (CEC), through inspections conducted by the Clean Energy Regulator, identified widespread non-compliant solar instal...
Writing Safe and Effective High Voltage Switching Programs: Key Considerations and Tip
High voltage (HV) switching is a high-risk activity requiring a disciplined, methodical approach. A critical tool for managing this risk is the swit...
Ten Common Mistakes People Make in Hazardous Areas
Hazardous area safety demands continuous vigilance, competency and respect for procedures. Small errors can have large consequences, but most incident...
Unlock Your Potential With Electrical Instrumentation at PMV
In an era where technology drives performance, electrical instrumentation has become a cornerstone of the process control industry. This specialisatio...
Navigating The Path To Hazardous Areas: A Guide For Electricians
Are you looking for a guide to navigating hazardous areas as an electrician? The journey of specializing in dangerous areas within the electrical indu...
Industrial Automation Trends Shaping The Future: Insights-for-electricians-students-and-institutions
Are you an electrician, student, or institution interested in staying ahead in the ever-evolving field of industrial automation? With the rapid advanc...
Matthew Garnaut
Stu
Josh Doble
Nathan Antonovich
Ryan Wehr
contact us
The right time is now!
The right time is now! Our training programs are beneficial to upskill and stand out in the industry
Learn more about our courses, dates, and enrolment options. Get in touch!